-
Multiple Compressor Controls
Trinity
Brochure305_EN_Controls.pdf 
Interrelated savings
Practical base load switch operationUp to three compressors of various types and sizes with automatic interconnected control - that’s trinity made by BOGE. The necessary connection is integrated in the compressor switch cabinet either already prepared at the factory or easily retrofitted. Alternatively an external wall mounting cased version is available. The current network pressure is measured by a pressure sensor. You only have to input the maximum and minimum pressure values and all the intermediate pressures of the compressors are automatically calculated. Extremely flexible : The adjustable base load switching cycle enables a constant load operation of all installed compressors over a defined period of time. This balancing of the compressors offers significant advantages as far as maintenance and service are concerned: trinity ensures an even load operation of all compressors minimising service costs. For the selection of various switching times you can choose from 26 channels for three freely selectable priorities (incl. cutoffs, e.g. at night or at the weekend), releasing new potentials for energy saving. Everything in one box:
The wall mounted external version of trinity.Simply more effective •Measuring of actual pressure with pressure sensor •Automatic cascading •Backlit LC display •Memory of all settings even in case of power failure •Extremely versatile •Great value Visible data •Pressure display combined with display of compressors currently in load operation •Pressure display combined with current compressor priorities •Pressure display combined with current cycle rest time •Pressure display combined with display of weekly timer •Display Pmin and Pmax switching points •Display of precise time •Display of installed software version The PRIME control has an integrated real-time clock and a switch clock function enabling it to evenly control external equipment. Communication is achieved via RS 485 interfaces or potential-free signalling contacts. airtelligence provis 2.0
Brochure356_EN_provis2.0.pdf 
Control gets a new dimension!
The new airtelligence provis 2.0 is one of the most innovating controls on the market and at the same time very easy to operate. Up to 16 compressors - rigid or frequency controlled, from BOGE or other manufacturers can easily be connected and they are switched very efficiently by the demand-based global control. Additional accessories such as driers, condensate separators, filters, blowers, valves, etc. can also be easily connected. The 9" TFT-colour display with touch function enables the intuitive operation and displays parameters clearly. airtelligence provis 2.0 is INTUITIVE.
- high-quality 9" TFT-colour display with LED backlight and touch function
- carry out settings with a tap of the fingertip
- intuitive operationairtelligence provis 2.0 is INTELLIGENT.
- demand-based control of all connected compressors
- selection of the optimal compressor combination based on the real compressed air extraction
- optimization of duty cycles/idle times and prevention of energy-intensive overcompressionairtelligence provis 2.0 is VERSATILE.
- controls up to 16 rigid or frequency controlled compressors
- in addition up to 24 more accessory components
- from BOGE or from other manufacturersairtelligence provis 2.0 is IMPRESSIVE.
- browser-based visualisation
- ethernet interface for the integration into the existing server structure
- trend displays of the pressure profile, the compressor status, the volume flow, the pressure dewpoint etc. directly on your PC-screen
- optional with additional visualisation possibilities, such as an extensive alarm management, possibility of remote monitoring with analysis and evaluation of data via data export etc.airtelligence provis 2.0 is UNCOMPLICATED. Start-up via Modbus-scan
- Simple start-up via Modbus-Scan for the quick identification of compressors and accessory components
- Time saving by means of integrated database for the compressor’s nominal valuesUpdates via USB-stick
- Updates can easily be installed without PC via USB
- Preconfiguration of profiles for the easy start-up is possible via USBThe new airtelligence provis 2.0 of BOGE is easy to operate but hard to surpass! 
BOGE airlogic - a new software module to expand the BOGE airtelligence provis 2.0 master control system
Manage your compressed air systems intelligently. With airlogic from BOGE.
BOGE expands the airtelligence provis 2.0 with the airlogic formula editorThe new airlogic software module is an expansion for the BOGE airtelligence provis 2.0 master control system. This particularly flexible formula editor allows you to manage your compressed air system intelligently, cost-effectively and without any additional programming costs.
This intelligent standard solution from BOGE makes it possible to individually link system signals and to set up complex switching operations. With the airlogic there is no need for customer-specific programming, which is usually very expensive.
Efficiency gain via individual control system
Based on the actual current demand, the airtelligence provis 2.0 master control unit from BOGE forecasts whether more or less compressed air will be needed, and then switches on the optimal combination of compressors accordingly. This minimises the switching between load and no-load operation and significantly reduces electricity consumption. The airlogic formula editor, which is included in the software update, allows specific processes to be actuated and monitored. Practically all of the values available within the system can be used.Put simply, the function is very similar to the "if-then-else" formula in Excel. For example, a formula for switching on the drier could be: "If the compressor starts in full load operation and the drier is ready, then switch on the drier with a delay of ten seconds." The results can also be saved in a cache, so that several formulae can be linked to each other.
The greatest flexibility at a favourable price
The airlogic formula editor, included in the software update, affords its users the highest level of flexibility in the production of compressed air. The alternative PLC control systems require system-specific programming, which is usually very expensive. The airlogic is a standard module that solves this issue simply, intelligently and cost-effectively.airtelligence plus
Brochure346_EN_airt-plus.pdf 
A real plus for efficient operation
BOGE airtelligence plus allows you to control any combination of up to six fixed speed or frequency controlled compressors in a combined compressor system. The base load switch control enables the user to synchronise the operation of all compressors in the system, thus reducing service costs and simultaneously increasing compressed air supply. This is how simple and cost effective BOGE efficiency can be!
The plus’ are six-fold with BOGE airtelligence plus
• LCD 4" colour display screen with plain text display
• visual display of operating conditions and parameters
• user friendly and intuitive operation
• fast connection with a minimum of wiring using the BUS interface
• weekly timer offers 50 channels for programming compressor operation including switch-off times, e.g. overnight
• compatible with previous generation BOGE compressors and most other compressor makes and models
Boge Compressors